JVC MP3 Player RC EX36S User Manual

ADJUSTING THE SOUND  
Turn the VOLUME knob (or pressVOLUME + / – button on the remote control unit) to increase or decrease  
the volume to desired level. The volume level can be adjusted in 31 steps from “MIN” to “MAX”.  
FIRST THINGS  
NAMES OF PARTS AND CONTROLS  
ENGLISH  
This portable system operates on battery or AC power.  
Top and front sides:  
Main unit  
Turning off the sound temporarily  
During playback, press MUTING on the remote control unit to turn the sound off.The MUTING indicator  
appears in the display window. Press it again to restore the sound.  
CD PORTABLE SYSTEM  
FM telescopic antenna  
PHONES jack  
RC-EX36S  
1
2 3  
4 5  
6 7 8  
Reinforcing the bass sound  
Press and hold HBS/PRESET EQ so that the HBS indicator appears in the display window. You can  
enjoy powerful bass sound with the Hyper-Bass Sound effect.  
BY/ON  
ND  
STA  
PR  
OGRAM/  
OCK SET  
CL  
PR  
ES  
ET  
DO  
W
N
PRESET  
UP  
HB  
S/  
PR  
ES  
ET  
EQ  
PUSH  
Supplied power cord  
Selecting the sound mode  
You can select one of the 5 preset sound modes.  
Press HBS/PRESET EQ repeatedly until the indicator for the sound mode you want appears in the  
display window.  
AC outlet  
G
R
O
U
P
P
TO  
S
T
APE  
RANDOM  
Battery compartment  
SE  
U
A
Y/P  
PLA  
CD  
TUNER  
REMOTE  
SENSOR  
DISPLAY  
B
A
N
D
CLASSIC: Enriched sound with fine treble and ample bass.  
ROCK : Powerful sound emphasizing treble and bass.  
POP : More presence in the vocals and midrange.  
JAZZ : Accented lower frequencies for jazz-type music.  
FLAT : Equalizer effect is canceled.  
INSERTING BATTERIES  
1
Open the battery compartment cover.  
Pull the battery compartment cover toward you while pressing the sections marked by the arrows.  
2
Insert six R20 (SUM-1)/D (13D)-size batteries. (not supplied)  
Be sure to insert the batteries with the (+) and (–) terminals positioned correctly.  
USING THE RADIO  
9
10 11 12 13 14 15  
TUNING IN RADIO STATIONS  
8
9
PRESET UP button  
TAPE button  
1
2
3
VOLUME knob  
STANDBY/ON  
GROUP – button  
GROUP + button  
1
2
3
Press TUNER/BAND to enter the tuner mode.  
button  
Press TUNER/BAND to select the band, FM or AM.  
Press and hold 4 or ¢ for more than 1 second.  
The unit starts searching and stops when a station of sufficient signal strength is tuned in.  
If you press 4 or ¢ briefly and repeatedly, the frequency changes step by step.  
CD/RANDOM button  
TUNER/BAND button  
INSTRUCTIONS  
10 REMOTE SENSOR  
11 Display window  
12 Cassette deck  
13 DISPLAY button  
14 4 button  
4
Tape operation buttons  
PAUSE 8 button  
R20 (SUM-1)/D (13D)-size batteries  
Changing the FM reception mode  
When an FM stereo broadcast is hard to receive or noisy, press FM MODE/BEAT CUT on the remote  
control unit so that the MONO indicator appears in the display window.  
To restore the stereo effect, press FM MODE/BEAT CUT again so that the MONO indicator goes off.  
The FM MODE will be changed to STEREO also when changing the station.  
STOP/EJECT § button  
FF 1 button  
Thank you for purchasing this JVC product.  
Please read these instructions carefully before starting operation to be  
sure to obtain optimum performance and a longer service life from the  
unit.  
3
Replace the battery compartment cover.  
REW ¡ button  
PLAY 2 button  
¢ button  
Inserting Batteries into the Remote Control Unit:  
PLAY/PAUSE 6 button  
STOP 7 button  
REC ÷ button  
LVT1385-008A [E/EN]  
Match the polarity (+ and –) of the batteries. R03 (UM-4)/AAA (24F)×2 (supplied)  
5
6
7
CD door  
0205NSMBICORI  
EN ©2005 Victor Company of Japan, Limited  
PRESETTING STATIONS  
You can preset 20 FM and 10 AM stations.  
15 HBS/PRESET EQ button  
PRESET DOWN button  
PROGRAM/CLOCK SET button  
1
2
3
Press TUNER/BAND to select the band, FM or AM.  
Press 4 or ¢ to tune in the station you want to preset.  
Press PROGRAM/CLOCK SET.  
SAFETY PRECAUTIONS  
Names of buttons:  
Remote control unit  
The PROGRAM indicator and the preset number start blinking in the display window.  
Caution ––  
STANDBY/ON switch!  
Disconnect the mains plug to shut the power off completely. The  
position does not disconnect the mains line. The power can be remote controlled.  
STANDBY/ON switch in any  
PROGRAM  
1
2
6
Note: The battery power will be switched off when you plug the power cord into the Ó AC  
STANDBY/ON  
CD/  
TUNER/  
BAND  
RANDOM  
TAPE  
IN jack on the unit.  
MHz  
CAUTION  
1
4
7
0
2
5
8
3
6
FLAT  
DISPLAY  
To reduce the risk of electrical shocks, fire, etc.:  
1. Do not remove screws, covers or cabinet.  
2. Do not expose this appliance to rain or moisture.  
HBS/  
PRESET EQ  
7
9
OVER  
CAUTION:  
4
Press PRESET UP or PRESET DOWN to select the preset number while the PROGRAM indicator is  
blinking.  
You can use the number buttons on the remote control unit to select the preset number directly.  
Example: To select preset number 5, press 5. To select preset number 15, press OVER, 1, then 5.  
To select preset number 20, press OVER, 2, then 0.  
FM MODE  
/BEAT CUT  
To avoid battery leakage or explosion, handle batteries properly.  
• If you are not going to use your system for a month or more, remove the batteries from the battery  
compartment.  
• Dispose of batteries in the proper manner, according to federal, state, and local regulations.  
• Do not mix with different battery types or with new and old ones, or do not attempt to charge a  
battery not intended to be recharged.  
PROGRAM/  
CLOCK SET  
UP  
+
GROUP  
INTRO  
PRESET  
DOWN  
REPEAT  
MUTING  
3
4
5
8
9
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
VOLUME  
CAUTION: Do not open the top cover. There are no user serviceable parts inside  
2.  
PROGRAM  
the unit; leave all servicing to qualified service personnel.  
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or  
defeated. Avoid direct exposure to beam.  
• Discard leaky batteries immediately.Leaking batteries can cause skin burns or other personal injury.  
Preset number  
MHz  
RM-SRCEX30J REMOTE CONTROL  
FLAT  
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.  
SUPPRLYING AC POWER  
5
6
Press PROGRAM/CLOCK SET while the PROGRAM indicator is blinking.  
The tuned station in step 2 is stored in the preset number selected in step 4.  
Storing a new station on a used number erases the previously stored one.  
When the PROGRAM indicator stops blinking, the tuned station is stored in the preset number without  
pressing PROGRAM/CLOCK SET.  
If you use the number buttons to select the preset number in step 4, pressing PROGRAM/CLOCK SET  
is not necessary in this step.  
Repeat steps 2 to 5 to preset other stations, using different preset numbers.  
Plug the power cord into the Ó AC IN jack on the back of the unit, and into an AC power outlet.  
Note: To switch off the system completely, unplug the power cord.  
CAUTION -  
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS  
DEFEATED. AVOID EXPOSURE TO BEAM.  
1
2
STANDBY/ON  
DISPLAY button  
button  
6
CD/RANDOM button  
TUNER/BAND button  
TAPE button  
Number buttons  
GROUP +/– buttons  
VOLUME +/– buttons  
VORSICHT !  
UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DECKEL  
GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG  
ÜBERBRÜCKT IST. NICHT DEM STRAHL AUSSETZEN!  
CAUTIONS:  
HBS/PRESET EQ button  
FM MODE/BEAT CUT button  
PRESET UP/DOWN buttons  
PROGRAM/CLOCK SET button  
INTRO button  
1. ONLY USE JVC POWER CORD PROVIDED WITH THIS UNIT TO AVOID MALFUNCTION OR  
DAMAGE TO THE UNIT. REMOVE BATTERIES WHEN USING THE POWER CORD.  
2. BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN  
THE UNIT IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.  
7
8
9
3
4
VARNING -  
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH  
SPÄRR ÄR URKOPPLAD STRÅLEN ÄR FARLIG.  
ADVARSEL -  
USYNLIG LASERSTRÅLING VED ÅBNING NÅR  
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ  
UDSÆTTELSE FOR STRÅLING.  
REPEAT button  
MUTING button  
Tuning in a preset station  
USING HEADPHONES  
1
2
Press TUNER/BAND to select the band, FM or AM.  
Press PRESET UP or PRESET DOWN repeatedly until the desired preset number appears.  
You can use the number buttons on the remote control unit to select the preset number directly.  
Example:  
Connect commercially available headphones to the PHONES jack on the rear of the main unit. While the  
headphones are connected, the speakers do not produce any sound. Before connecting the headphones,  
make sure to turn down the sound volume.  
5
3/8 button  
4 button  
CAUTION  
¢ button  
Do not block the ventilation openings or holes.  
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able  
to get out.)  
Do not place any naked flame sources, such as lighted candles, on the apparatus.  
When discarding batteries, environmental problems must be considered and local rules or laws govern-  
ing the disposal of these batteries must be followed strictly.  
Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with  
liquids, such as vases, shall be placed on the apparatus.  
7 button  
To select preset number 5, press 5.  
To select preset number 15, press OVER, 1, then 5.  
To select preset number 20, press OVER, 2, then 0.  
ANTENNAS  
The AM antenna is built in, so adjusting the position of the unit may help AM reception.The FM telescopic  
antenna on the back of the unit can be extended and rotated for better FM reception.  
GENERAL CONTROLS  
Note  
If you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few  
days. If this happens, preset the stations again.  
STANDBY/ON  
- Press to turn on/off the unit.  
The display window lights up when the unit is turned on. (Note, however, that the display window does not  
light even when the unit is turned on if the unit is operated on batteries.)  
USING THE TAPE  
SETTING THE CLOCK  
Before operating the unit any further, first set the clock built in this unit.  
The clock uses 24-hour indication.  
|Forward direction  
Caution: Proper Ventilation  
To avoid risk of electric shock and fire, and to prevent damage, locate  
the apparatus as follows:  
1
Press STANDBY/ON  
The clock flashes on the display window.  
to turn off the unit, if it is turned on.  
1
2
3
Front:  
No obstructions and open spacing.  
Sides/ Top/ Back:  
No obstructions should be placed in the areas shown by the dimensions below.  
Bottom:  
2
Press and hold PROGRAM/CLOCK SET for more than 2 seconds.  
The hour digits start flashing.  
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand  
with a height of 10 cm or more.  
PAUSE 8 – Press to interrupt tape play or record mode. Press a second time to resume tape play or tape  
record mode.  
STOP/EJECT § – Press to stop the current tape activity, or to open the cassette compartment door  
when no buttons are active.  
3
4
Press 4 or ¢ to adjust the hour, then press PROGRAM/CLOCK SET.  
Front view  
Side view  
15 cm  
15 cm  
The minute digits start flashing.  
FF 1 – In stop mode, press to advance the tape toward the end. (When the tape reaches the end, press  
STOP/EJECT § to release the depressed button.)  
15 cm  
15 cm  
15 cm  
15 cm  
REW ¡ – In stop mode, press to rewind the tape toward the beginning. (When the tape reaches the end,  
press STOP/EJECT § to release the depressed button.)  
10 cm  
10 cm  
PLAY 2 – Press to play cassettes.  
REC ÷ – Press to record from the radio or CD player.  
Press 4 or ¢ to adjust the minutes, then press PROGRAM/CLOCK SET.  
PLAYING A CASSETTE TAPE  
1. Press TAPE to enter the tape mode.  
Notes:  
If there is a power failure, the clock loses the setting and is reset to “0:00.The clock indication will keep  
2. Press STOP/EJECT § to open the cassette compartment door.  
3. Load a cassete. Use only a type-I normal tape.  
4. Close the door securely.  
5. Press PLAY 2 to begin playing the tape. The cassette tape plays until it reaches the end of the side,  
then it automatically stops.  
flashing until you set the clock again.  
You can also set the clock when the unit is in STANDBY mode. In this case, follow the procedures from  
step 2.  
To show the clock when the unit is on.  
Press DISPLAY.  
Each time you press the button, the display changes the clock indication and the normal indication alternately.  
(Operating the unit while clock indication is displayed changes the display to the normal indication.)  
Fast-winding a tape  
Press REW ¡ or FF 1.  
When the tape reaches the end, press STOP/EJECT § to release REW ¡ or FF 1.  
 

Indesit Dishwasher D41 User Manual
Jabra Bluetooth Headset GN1215 User Manual
John Deere Compact Loader 750J User Manual
JVC Stereo Receiver RX DP20VBK User Manual
Jwin Weather Radio JX M133 User Manual
KitchenAid Dishwasher 8573157 User Manual
KitchenAid Food Processor KFP1333 User Manual
Kodak Digital Camera MD1063 User Manual
Konica Minolta All in One Printer 2480 MF User Manual
Korg Car Video System MP 10 PRO User Manual